| For sales and technical support (909) 554-0054 |
Barstool Racers
BRAKE SPECIAL
BRAKE SPECIAL
Complete brake kit comes with
New Billet caliper
New caliper bracket
Standard rotor for 1" axle
Brake lever 7/8"
64" Brake cable
Cable stop"
3" Return spring
1/4 Key way
2 1/4" Swivel pins
New Billet caliper
New caliper bracket
Standard rotor for 1" axle
Brake lever 7/8"
64" Brake cable
Cable stop"
3" Return spring
1/4 Key way
2 1/4" Swivel pins
| If you need stopping power for your barstool racer or gokart this is the kit you will need, This mechanical brake is probably the best on the market today don't let the low cost of other brakes fool you THEY DON'T COMPARE |
Complete MCP brake kit
Cast caliper with pads
bore is 1-3/8" mcp1375
Cast master cylinder
bore is 7/8" mcp875ep
3/16" 7.1 dia rotor 4 slot mcp712
brake line
1" axle hub mcp100
fittings
This kit can use either dot 3 ,4
or 5 fluid.
NOTE WARNING
DO NOT MIX FLUIDS. MIXING OF
BRAKE FLUIDS WILL RESULT IN
BRAKE FAILURE. BRAKE
FAILURE CAN CAUSE SERIOUS
INJURY
Cast caliper with pads
bore is 1-3/8" mcp1375
Cast master cylinder
bore is 7/8" mcp875ep
3/16" 7.1 dia rotor 4 slot mcp712
brake line
1" axle hub mcp100
fittings
This kit can use either dot 3 ,4
or 5 fluid.
NOTE WARNING
DO NOT MIX FLUIDS. MIXING OF
BRAKE FLUIDS WILL RESULT IN
BRAKE FAILURE. BRAKE
FAILURE CAN CAUSE SERIOUS
INJURY
| MCP Minilite Brake Kits |
| your cost only $ 199.95 |
| MCP cast racing gokart brake kits are ideal for your Barstool racers, Mini Choppers and any other motorized project where you may need stopping power |
| New 1-1/4" brake kit has the same features as the 1" kit except it comes with a 1-1/4" billet hub and 7.1" rotor |
| Weld on brake bracket for New billet caliper and MB-1 brake. This bracket is not included in the MB-1 brake kit |
| Weld on brake bracket for New billet caliper and MB-1 brake. This bracket is included in the new billet disc brake kit |
